We collect and classify mentions across channels that move before tickets do: advisories, researcher posts, exploit references, and technical discussion.
[ 02 ]
Score attention
CVEs surface by signal volume and trajectory, not a static severity label, so spikes in discussion map to spikes in urgency.
[ 03 ]
Surface threat context
Exploit momentum, PoC noise, active exploitation flags, and patch availability appear alongside each CVE so triage is factual, not guesswork.
[ 04 ]
Scope to your stack
Filter by vendor and product (Microsoft, Apple, Cisco, and more) so the feed reflects exposure you actually run, not the entire internet’s backlog.
> loop: raw social post → classify → enrich with threat context → emit to your scoped feed
About VulnSocial
VulnSocial is not a generic scanner. We aggregate and classify vulnerability signals from the channels that move first: researchers, advisories, exploit references, and community discussion. CVEs are ordered by attention and momentum, not CVSS alone. Active exploitation indicators, PoC noise, and patch availability sit next to each CVE so triage is grounded in what is happening now.
Scope the dashboard with vendor and product filters to match your stack. Security teams use VulnSocial to cut through alert fatigue: SOC analysts for ranked triage, leads for credible briefings, DevSecOps for stack-specific trending and remediation timing. Share snapshots with your team from the feed when you need to align on what matters today.
VULNSOCIAL
fedoraproject/codeready_linux_builderFix what matters first
Ranked by live signal for this scope. Use the feed below to prioritize fixes.
We collect and classify mentions across channels that move before tickets do: advisories, researcher posts, exploit references, and technical discussion.
[ 02 ]
Score attention
CVEs surface by signal volume and trajectory, not a static severity label, so spikes in discussion map to spikes in urgency.
[ 03 ]
Surface threat context
Exploit momentum, PoC noise, active exploitation flags, and patch availability appear alongside each CVE so triage is factual, not guesswork.
[ 04 ]
Scope to your stack
Filter by vendor and product (Microsoft, Apple, Cisco, and more) so the feed reflects exposure you actually run, not the entire internet’s backlog.
> loop: raw social post → classify → enrich with threat context → emit to your scoped feed
About VulnSocial
VulnSocial is not a generic scanner. We aggregate and classify vulnerability signals from the channels that move first: researchers, advisories, exploit references, and community discussion. CVEs are ordered by attention and momentum, not CVSS alone. Active exploitation indicators, PoC noise, and patch availability sit next to each CVE so triage is grounded in what is happening now.
Scope the dashboard with vendor and product filters to match your stack. Security teams use VulnSocial to cut through alert fatigue: SOC analysts for ranked triage, leads for credible briefings, DevSecOps for stack-specific trending and remediation timing. Share snapshots with your team from the feed when you need to align on what matters today.
A carefully crafted If: request header can cause a memory read, or write of a single zero byte, in a pool (heap) memory location beyond the header value sent. This could cause the process to crash.
This issue affects Apache HTTP Server 2.4.54 and earlier.
Realtek Jungle SDK version v2.x up to v3.4.14B provides a diagnostic tool called 'MP Daemon' that is usually compiled as 'UDPServer' binary. The binary is affected by multiple memory corruption vulnerabilities and an arbitrary command injection vulnerability that can be exploited by remote unauthenticated attackers.
An improper limitation of a pathname to a restricted directory ('path traversal') vulnerability in Fortinet FortiMail 8.0.0 through 8.0.1, FortiMail 7.6.0 through 7.6.6, FortiMail 7.4.0 through 7.4.8, FortiMail 7.2.0 through 7.2.9 may allow an unauthenticated attacker to write arbitrary files on the underlying system via crafted HTTP or HTTPS requests.
Bitcoin Core 0.14.x before 0.14.3, 0.15.x before 0.15.2, and 0.16.x before 0.16.3 and Bitcoin Knots 0.14.x through 0.16.x before 0.16.3 allow a remote denial of service (application crash) exploitable by miners via duplicate input. An attacker can make bitcoind or Bitcoin-Qt crash.
Zammad versions 6.3.0 to 6.5.4 are vulnerable a session hijack vulnerability that leads to remote code execution as the zammad user. The bug is also present in version 7.0.0 to version 7.1.2, but not exploitable due to changes in the underlying framework.
Apache Log4j2 2.0-beta9 through 2.15.0 (excluding security releases 2.12.2, 2.12.3, and 2.3.1) JNDI features used in configuration, log messages, and parameters do not protect against attacker controlled LDAP and other JNDI related endpoints. An attacker who can control log messages or log message parameters can execute arbitrary code loaded from LDAP servers when message lookup substitution is enabled. From log4j 2.15.0, this behavior has been disabled by default. From version 2.16.0 (along with 2.12.2, 2.12.3, and 2.3.1), this functionality has been completely removed. Note that this vulnerability is specific to log4j-core and does not affect log4net, log4cxx, or other Apache Logging Services projects.
A heap-based buffer overflow vulnerability in Fortinet FortiOS 7.6.0 through 7.6.3, FortiOS 7.4.0 through 7.4.8, FortiOS 7.2.0 through 7.2.11, FortiOS 7.0.0 through 7.0.17, FortiOS 6.4 all versions, FortiSwitchManager 7.2.0 through 7.2.6, FortiSwitchManager 7.0.0 through 7.0.5 allows attacker to execute unauthorized code or commands via specially crafted packets
In the Linux kernel, the following vulnerability has been resolved:
tls: fix handling of zero-length records on the rx_list
Each recvmsg() call must process either
- only contiguous DATA records (any number of them)
- one non-DATA record
If the next record has different type than what has already been
processed we break out of the main processing loop. If the record
has already been decrypted (which may be the case for TLS 1.3 where
we don't know type until decryption) we queue the pending record
to the rx_list. Next recvmsg() will pick it up from there.
Queuing the skb to rx_list after zero-copy decrypt is not possible,
since in that case we decrypted directly to the user space buffer,
and we don't have an skb to queue (darg.skb points to the ciphertext
skb for access to metadata like length).
Only data records are allowed zero-copy, and we break the processing
loop after each non-data record. So we should never zero-copy and
then find out that the record type has changed. The corner case
we missed is when the initial record comes from rx_list, and it's
zero length.
In the Linux kernel, the following vulnerability has been resolved:
crypto: af_alg - Disallow concurrent writes in af_alg_sendmsg
Issuing two writes to the same af_alg socket is bogus as the
data will be interleaved in an unpredictable fashion. Furthermore,
concurrent writes may create inconsistencies in the internal
socket state.
Disallow this by adding a new ctx->write field that indiciates
exclusive ownership for writing.
GitLab has remediated an issue in GitLab CE/EE affecting all versions from 18.7 before 18.11.12, 19.0 before 19.0.9, 19.1 before 19.1.8, 19.2 before 19.2.6, and 19.3 before 19.3.2 that, under certain conditions, an unauthenticated user could have read arbitrary files from the GitLab server due to improper path confinement and missing authentication enforcement in the repository commits API.
Malicious code was discovered in the upstream tarballs of xz, starting with version 5.6.0.
Through a series of complex obfuscations, the liblzma build process extracts a prebuilt object file from a disguised test file existing in the source code, which is then used to modify specific functions in the liblzma code. This results in a modified liblzma library that can be used by any software linked against this library, intercepting and modifying the data interaction with this library.
A Remote Code Execution vulnerability exists in the gVectors wpDiscuz plugin 7.0 through 7.0.4 for WordPress, which allows unauthenticated users to upload any type of file, including PHP files via the wmuUploadFiles AJAX action.
Improper input validation vulnerability in Citrix NetScaler ADC and Citrix NetScaler Gateway.
This issue affects ADC: before 14.1-73.37, before 13.1-64.23, before 14.1-73.37 FIPS, and before 13.1.37.279 FIPS and NDcPP; Gateway: before 14.1-73.37 and before 13.1-64.23 leading to an unauthenticated attacker to execute arbitrary commands.
An unauthenticated attacker can make `get_page_template()` page-template resolution include a chosen readable local `.php` file outside the active theme directories. If relevant pre-conditions for both the server and the active theme are met, this can lead to RCE.
A remote code execution vulnerability exists in Remote Desktop Services formerly known as Terminal Services when an unauthenticated attacker connects to the target system using RDP and sends specially crafted requests, aka 'Remote Desktop Services Remote Code Execution Vulnerability'.
A vulnerability in the API session-based authentication management of Cisco Catalyst SD-WAN Manager could allow an unauthenticated, remote attacker to access an affected system with privileges of the admin user.
This vulnerability is due to improper handling of URI encoding in an HTTP request, which allows the request to bypass an authentication rule that is intended to restrict access to a specific API endpoint. An attacker could exploit this vulnerability by sending a crafted HTTP request to the API of the affected system. A successful exploit could allow the attacker to bypass authentication and gain access to the API as the admin user.
A carefully crafted If: request header can cause a memory read, or write of a single zero byte, in a pool (heap) memory location beyond the header value sent. This could cause the process to crash.
This issue affects Apache HTTP Server 2.4.54 and earlier.
Realtek Jungle SDK version v2.x up to v3.4.14B provides a diagnostic tool called 'MP Daemon' that is usually compiled as 'UDPServer' binary. The binary is affected by multiple memory corruption vulnerabilities and an arbitrary command injection vulnerability that can be exploited by remote unauthenticated attackers.
An improper limitation of a pathname to a restricted directory ('path traversal') vulnerability in Fortinet FortiMail 8.0.0 through 8.0.1, FortiMail 7.6.0 through 7.6.6, FortiMail 7.4.0 through 7.4.8, FortiMail 7.2.0 through 7.2.9 may allow an unauthenticated attacker to write arbitrary files on the underlying system via crafted HTTP or HTTPS requests.
Bitcoin Core 0.14.x before 0.14.3, 0.15.x before 0.15.2, and 0.16.x before 0.16.3 and Bitcoin Knots 0.14.x through 0.16.x before 0.16.3 allow a remote denial of service (application crash) exploitable by miners via duplicate input. An attacker can make bitcoind or Bitcoin-Qt crash.
Zammad versions 6.3.0 to 6.5.4 are vulnerable a session hijack vulnerability that leads to remote code execution as the zammad user. The bug is also present in version 7.0.0 to version 7.1.2, but not exploitable due to changes in the underlying framework.
Apache Log4j2 2.0-beta9 through 2.15.0 (excluding security releases 2.12.2, 2.12.3, and 2.3.1) JNDI features used in configuration, log messages, and parameters do not protect against attacker controlled LDAP and other JNDI related endpoints. An attacker who can control log messages or log message parameters can execute arbitrary code loaded from LDAP servers when message lookup substitution is enabled. From log4j 2.15.0, this behavior has been disabled by default. From version 2.16.0 (along with 2.12.2, 2.12.3, and 2.3.1), this functionality has been completely removed. Note that this vulnerability is specific to log4j-core and does not affect log4net, log4cxx, or other Apache Logging Services projects.
A heap-based buffer overflow vulnerability in Fortinet FortiOS 7.6.0 through 7.6.3, FortiOS 7.4.0 through 7.4.8, FortiOS 7.2.0 through 7.2.11, FortiOS 7.0.0 through 7.0.17, FortiOS 6.4 all versions, FortiSwitchManager 7.2.0 through 7.2.6, FortiSwitchManager 7.0.0 through 7.0.5 allows attacker to execute unauthorized code or commands via specially crafted packets
In the Linux kernel, the following vulnerability has been resolved:
tls: fix handling of zero-length records on the rx_list
Each recvmsg() call must process either
- only contiguous DATA records (any number of them)
- one non-DATA record
If the next record has different type than what has already been
processed we break out of the main processing loop. If the record
has already been decrypted (which may be the case for TLS 1.3 where
we don't know type until decryption) we queue the pending record
to the rx_list. Next recvmsg() will pick it up from there.
Queuing the skb to rx_list after zero-copy decrypt is not possible,
since in that case we decrypted directly to the user space buffer,
and we don't have an skb to queue (darg.skb points to the ciphertext
skb for access to metadata like length).
Only data records are allowed zero-copy, and we break the processing
loop after each non-data record. So we should never zero-copy and
then find out that the record type has changed. The corner case
we missed is when the initial record comes from rx_list, and it's
zero length.
In the Linux kernel, the following vulnerability has been resolved:
crypto: af_alg - Disallow concurrent writes in af_alg_sendmsg
Issuing two writes to the same af_alg socket is bogus as the
data will be interleaved in an unpredictable fashion. Furthermore,
concurrent writes may create inconsistencies in the internal
socket state.
Disallow this by adding a new ctx->write field that indiciates
exclusive ownership for writing.
GitLab has remediated an issue in GitLab CE/EE affecting all versions from 18.7 before 18.11.12, 19.0 before 19.0.9, 19.1 before 19.1.8, 19.2 before 19.2.6, and 19.3 before 19.3.2 that, under certain conditions, an unauthenticated user could have read arbitrary files from the GitLab server due to improper path confinement and missing authentication enforcement in the repository commits API.
Malicious code was discovered in the upstream tarballs of xz, starting with version 5.6.0.
Through a series of complex obfuscations, the liblzma build process extracts a prebuilt object file from a disguised test file existing in the source code, which is then used to modify specific functions in the liblzma code. This results in a modified liblzma library that can be used by any software linked against this library, intercepting and modifying the data interaction with this library.
A Remote Code Execution vulnerability exists in the gVectors wpDiscuz plugin 7.0 through 7.0.4 for WordPress, which allows unauthenticated users to upload any type of file, including PHP files via the wmuUploadFiles AJAX action.
Improper input validation vulnerability in Citrix NetScaler ADC and Citrix NetScaler Gateway.
This issue affects ADC: before 14.1-73.37, before 13.1-64.23, before 14.1-73.37 FIPS, and before 13.1.37.279 FIPS and NDcPP; Gateway: before 14.1-73.37 and before 13.1-64.23 leading to an unauthenticated attacker to execute arbitrary commands.
An unauthenticated attacker can make `get_page_template()` page-template resolution include a chosen readable local `.php` file outside the active theme directories. If relevant pre-conditions for both the server and the active theme are met, this can lead to RCE.
A remote code execution vulnerability exists in Remote Desktop Services formerly known as Terminal Services when an unauthenticated attacker connects to the target system using RDP and sends specially crafted requests, aka 'Remote Desktop Services Remote Code Execution Vulnerability'.
A vulnerability in the API session-based authentication management of Cisco Catalyst SD-WAN Manager could allow an unauthenticated, remote attacker to access an affected system with privileges of the admin user.
This vulnerability is due to improper handling of URI encoding in an HTTP request, which allows the request to bypass an authentication rule that is intended to restrict access to a specific API endpoint. An attacker could exploit this vulnerability by sending a crafted HTTP request to the API of the affected system. A successful exploit could allow the attacker to bypass authentication and gain access to the API as the admin user.
